# Class=542 (0x021E) - Class2 Level I Control CLASS2.LEVEL1.CONTROL ## Description This class mirrors the [CLASS1.CONTROL](./class1.control.md) class but use a different data format with a GUID stored in the first 16 bytes of the data followed by the standard data thus offset with 16-bytes. See [CLASS2.PROTOCOL1](./class2.protocol1.md) for more information on the data format. ## Type=0 (0x00) - General event :id=type0 ``` VSCP_TYPE_CONTROL_GENERAL ``` General Event. ---- ## Type=1 (0x01) - Mute on/off :id=type1 ``` VSCP_TYPE_CONTROL_MUTE ``` Mute/Un-mute all sound generating nodes in a zone | Data byte | Description | | :---------: | ----------- | | 0 | If equal to zero no mute else mute. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=2 (0x02) - (All) Lamp(s) on/off :id=type2 ``` VSCP_TYPE_CONTROL_ALL_LAMPS ``` Turn on/off lamps on nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | If equal to zero off else on. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | See also [CLASS1.CONTROL, Type=40](./class1.control.md#type40) and [CLASS1.CONTROL, Type=42](./class1.control.md#type41) which don't use byte 0 but instead are separated in two distinct events. ---- ## Type=3 (0x03) - Open :id=type3 ``` VSCP_TYPE_CONTROL_OPEN ``` Perform open on all nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=4 (0x04) - Close :id=type4 ``` VSCP_TYPE_CONTROL_CLOSE ``` Perform close on all nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=5 (0x05) - TurnOn :id=type5 ``` VSCP_TYPE_CONTROL_TURNON ``` Turn On a nodes in a zone/subzone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=6 (0x06) - TurnOff :id=type6 ``` VSCP_TYPE_CONTROL_TURNOFF ``` Turn Off a nodes in a zone/subzone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=7 (0x07) - Start :id=type7 ``` VSCP_TYPE_CONTROL_START ``` Start all nodes in a zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=8 (0x08) - Stop :id=type8 ``` VSCP_TYPE_CONTROL_STOP ``` Stop all nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=9 (0x09) - Reset :id=type9 ``` VSCP_TYPE_CONTROL_RESET ``` Perform Reset on all nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=10 (0x0A) - Interrupt :id=type10 ``` VSCP_TYPE_CONTROL_INTERRUPT ``` Perform Interrupt on all nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | Interrupt level. (0 – 255 , zero is lowest interrupt level. ). | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=11 (0x0B) - Sleep :id=type11 ``` VSCP_TYPE_CONTROL_SLEEP ``` Perform Sleep on all nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=12 (0x0C) - Wakeup :id=type12 ``` VSCP_TYPE_CONTROL_WAKEUP ``` Wakeup all nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=13 (0x0D) - Resume :id=type13 ``` VSCP_TYPE_CONTROL_RESUME ``` Resume all nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=14 (0x0E) - Pause :id=type14 ``` VSCP_TYPE_CONTROL_PAUSE ``` Pause all nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=15 (0x0F) - Activate :id=type15 ``` VSCP_TYPE_CONTROL_ACTIVATE ``` Activate all nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=16 (0x10) - Deactivate :id=type16 ``` VSCP_TYPE_CONTROL_DEACTIVATE ``` Deactivate all nodes in zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=17 (0x11) - Reserved for future use :id=type17 ``` VSCP_TYPE_CONTROL_RESERVED17 ``` Reserved. ---- ## Type=18 (0x12) - Reserved for future use :id=type18 ``` VSCP_TYPE_CONTROL_RESERVED18 ``` Reserved. ---- ## Type=19 (0x13) - Reserved for future use :id=type19 ``` VSCP_TYPE_CONTROL_RESERVED19 ``` Reserved. ---- ## Type=20 (0x14) - Dim lamp(s) :id=type20 ``` VSCP_TYPE_CONTROL_DIM_LAMPS ``` Dim all dimmer devices on a segment to a specified dim value. | Data byte | Description | | :---------: | ----------- | | 0 | Value (0 – 100) . 0 = off, 100 = full on. 254 dim down one step. 255 dim up one step. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=21 (0x15) - Change Channel :id=type21 ``` VSCP_TYPE_CONTROL_CHANGE_CHANNEL ``` This is typical for changing TV channels or for changing AV amp input source etc. | Data byte | Description | | :---------: | ----------- | | 0 | A value between 0 and 127 indicates the channel number. A value between 128 to 157 is change down by the specified number of channels. A value between 160 to 191 is change up by the specified number of channels. A value of 255 means that this is an extended change channel event and that the channel number is sent in byte 3 and after if needed. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=22 (0x16) - Change Level :id=type22 ``` VSCP_TYPE_CONTROL_CHANGE_LEVEL ``` Change an absolute level. | Data byte | Description | | :---------: | ----------- | | 0 | Absolute level. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=23 (0x17) - Relative Change Level :id=type23 ``` VSCP_TYPE_CONTROL_RELATIVE_CHANGE_LEVEL ``` Relative Change Level request | Data byte | Description | | :---------: | ----------- | | 0 | Relative level. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=24 (0x18) - Measurement Request :id=type24 ``` VSCP_TYPE_CONTROL_MEASUREMENT_REQUEST ``` Measurement Request | Data byte | Description | | :---------: | ----------- | | 0 | Zero indicates all measurements supported by node should be sent (as separate events). Non-zero indicates a node specific index specifying which measurement to send. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=25 (0x19) - Stream Data :id=type25 ``` VSCP_TYPE_CONTROL_STREAM_DATA ``` Request to stream data | Data byte | Description | | :---------: | ----------- | | 0 | Sequence number which is increase by one for each stream data event sent. | | 1-7 | Stream data. | Use this event for streamed data out from a node. The source is then given by the nickname. If a specific received is needed use Zoned Stream. ---- ## Type=26 (0x1A) - Sync :id=type26 ``` VSCP_TYPE_CONTROL_SYNC ``` Synchronize events on a segment. | Data byte | Description | | :---------: | ----------- | | 0 | Sensor index for a sensor within a module (see [data coding](./data_coding.md). 255 is all sensors. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | The sensor index can be used to index units within a module also or used as some other indexing schema. ---- ## Type=27 (0x1B) - Zoned Stream Data :id=type27 ``` VSCP_TYPE_CONTROL_ZONED_STREAM_DATA ``` Request streamed data from nodes identified by zone/subzone. | Data byte | Description | | :---------: | ----------- | | 0 | Sequence number which is increase by one for each stream data event sent. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3-7 | Stream data. | ---- ## Type=28 (0x1C) - Set Pre-set :id=type28 ``` VSCP_TYPE_CONTROL_SET_PRESET ``` Some nodes may have pre-set configurations to choose from. With this event a pre-set can be set for a zone/sub-zone. A node that receive and act on this event send CLASS1.INFORMATION, Type=48 as a response event. | Data byte | Description | | :---------: | ----------- | | 0 | Code for pre-set to set. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=29 (0x1D) - Toggle state :id=type29 ``` VSCP_TYPE_CONTROL_TOGGLE_STATE ``` Toggle the state of a node. Note: This may be a bad design option as it often demands that the state should be known for the node on beforehand. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=30 (0x1E) - Timed pulse on :id=type30 ``` VSCP_TYPE_CONTROL_TIMED_PULSE_ON ``` With this event it is possible to generate a timed pulse that is on for a specified time. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3 | Control byte. | | 4-7 | Set time as a long with MSB in the first byte. | ##### Control Byte The control byte have the following bits defined | Bit | Description | | :---: | ----------- | | 0-3 | Time code (see table below) | | 4 | Reserved | | 5 | Reserved | | 6 | Send on event ( Class=20 Type = 3 (0x03) On ) when pulse goes on. | | 7 | Send off event ( Class=20 Type = 4 (0x04) Off ) when pulse goes off. | ##### Time code | Code | Description | | :----: | ----------- | | 0 | Time specified in microseconds. | | 1 | Time specified in milliseconds. | | 2 | Time specified in seconds. | | 3 | Time specified in minutes. | | 4 | Time specified in hours. | | 5 | Time specified in days. | ---- ## Type=31 (0x1F) - Timed pulse off :id=type31 ``` VSCP_TYPE_CONTROL_TIMED_PULSE_OFF ``` With this event it is possible to generate a timed pulse that is off for a specified time. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3 | Control byte. | | 4-7 | Set time as a long with MSB in the first byte. | ##### Control Byte The control byte have the following bits defined | Bit | Description | | :---: | ----------- | | 0-3 | Time code (see table below) | | 4 | Reserved | | 5 | Reserved | | 6 | Send on event ( Class=20 Type = 3 (0x03) On ) when pulse goes on. | | 7 | Send off event ( Class=20 Type = 4 (0x04) Off ) when pulse goes off. | ##### Time code | Code | Description | | :----: | ----------- | | 0 | Time specified in microseconds. | | 1 | Time specified in milliseconds. | | 2 | Time specified in seconds. | | 3 | Time specified in minutes. | | 4 | Time specified in hours. | | 5 | Time specified in days. | ---- ## Type=32 (0x20) - Set country/language :id=type32 ``` VSCP_TYPE_CONTROL_SET_COUNTRY_LANGUAGE ``` Set country and language. | Data byte | Description | | :---------: | ----------- | | 0 | Country/Language code. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3-7 | Country/Language code specific | | Language code | Description | Example | | :---------: | ----------- | ------- | | 0 | Custom coded system | Byte 3 = 0 English, Byte 3 = 1 German or similar. | | 1 | ISO 639-1 | nl for Dutch, en for English. | | 2 | ISO 639-2/T | nid for Dutch, eng for English. | | 3 | ISO 639-2/B | dut for Dutch, eng for English. | | 4 | ISO 639-3 | nid for Dutch, eng for English. | | 5 | IETF (RFC-5646/4647) | en-US for American English. en-GB British. | ISO codes can be found [here](https://en.wikipedia.org/wiki/List_of_ISO_639-1_codes) ---- ## Type=33 (0x21) - Big Change level :id=type33 ``` VSCP_TYPE_CONTROL_BIG_CHANGE_LEVEL ``` Big Change level can be used in situations when the one byte level of CLASS1.CONTROL, Type=22 is not enough. | Data byte | Description | | :---------: | ----------- | | 0 | Index | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3-7 | Level as signed integer. The range can be adjusted by the user by sending just the needed number of bytes (1-5) which form the signed integer (MSB first). | ---- ## Type=34 (0x22) - Move shutter up :id=type34 ``` VSCP_TYPE_CONTROL_SHUTTER_UP ``` Move shutter up. | Data byte | Description | | :---------: | ----------- | | 0 | Index. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=35 (0x23) - Move shutter down :id=type35 ``` VSCP_TYPE_CONTROL_SHUTTER_DOWN ``` Move shutter down. | Data byte | Description | | :---------: | ----------- | | 0 | Index. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=36 (0x24) - Move shutter left :id=type36 ``` VSCP_TYPE_CONTROL_SHUTTER_LEFT ``` Move shutter left. | Data byte | Description | | :---------: | ----------- | | 0 | Index. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=37 (0x25) - Move shutter right :id=type37 ``` VSCP_TYPE_CONTROL_SHUTTER_RIGHT ``` Move shutter right. | Data byte | Description | | :---------: | ----------- | | 0 | Index. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=38 (0x26) - Move shutter to middle position :id=type38 ``` VSCP_TYPE_CONTROL_SHUTTER_MIDDLE ``` Move shutter to middle position. | Data byte | Description | | :---------: | ----------- | | 0 | Index. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=39 (0x27) - Move shutter to preset position :id=type39 ``` VSCP_TYPE_CONTROL_SHUTTER_PRESET ``` Move shutter to preset position. | Data byte | Description | | :---------: | ----------- | | 0 | Index. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3 | Position 0-100. | ---- ## Type=40 (0x28) - (All) Lamp(s) on :id=type40 ``` VSCP_TYPE_CONTROL_ALL_LAMPS_ON ``` Turn on all lamps in a zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event.| | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | See also [CLASS1.CONTROL, Type=2](./class1.control.md#type2) ---- ## Type=41 (0x29) - (All) Lamp(s) off :id=type41 ``` VSCP_TYPE_CONTROL_ALL_LAMPS_OFF ``` Turn off all lamps in a zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event.| | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | See also [CLASS1.CONTROL, Type=2](./class1.control.md#type2) ---- ## Type=42 (0x2A) - Lock :id=type42 ``` VSCP_TYPE_CONTROL_LOCK ``` Lock devices in a zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event.| | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=43 (0x2B) - Unlock :id=type43 ``` VSCP_TYPE_CONTROL_UNLOCK ``` Unlock devices in a zone. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event.| | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=44 (0x2C) - PWM set :id=type44 ``` VSCP_TYPE_CONTROL_PWM ``` With this event it is possible to set duty cycle output such as PWM. | Data byte | Description | | :---------: | ----------- | | 0 | Repeat/counter: 0=repeat forever, >0 number of repeats | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3 | Control byte. | | 4 | Time-On MSB | | 5 | Time-On LSB | | 6 | Time-Off MSB | | 7 | Time-Off LSB | ##### Control Byte The control byte have the following bits defined | Bit | Description | | :---: | ----------- | | 0-3 | Time code (see table below) | | 4 | Reserved | | 5 | Reserved | | 6 | Reserved | | 7 | Reserved | ##### Time code | Code | Description | | :----: | ----------- | | 0 | Time specified in microseconds. | | 1 | Time specified in milliseconds. | | 2 | Time specified in seconds. | | 3 | Time specified in minutes. | | 4 | Time specified in hours. | | 5 | Time specified in days. | ---- ## Type=45 (0x2D) - Lock with token :id=type45 ``` VSCP_TYPE_CONTROL_TOKEN_LOCK ``` Lock devices with token. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event.| | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3-7 | Token. This token can be 1-5 bytes and length of event is set accordingly. It should be interpreted as an unsigned integer in the range 0-1099511627775. MSB byte is stored in first byte. | ---- ## Type=46 (0x2E) - Unlock with token :id=type46 ``` VSCP_TYPE_CONTROL_TOKEN_UNLOCK ``` Unlock devices with token. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event.| | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3-7 | Token. This token can be 1-5 bytes and length of event is set accordingly. It should be interpreted as an unsigned integer in the range 0-1099511627775. MSB byte is stored in first byte. | ---- ## Type=47 (0x2F) - Set security level :id=type47 ``` VSCP_TYPE_CONTROL_SET_SECURITY_LEVEL ``` Set security level. | Data byte | Description | | :---------: | ----------- | | 0 | Security level to set. 0-255 (Higher value is higher security level). | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=48 (0x30) - Set security pin :id=type48 ``` VSCP_TYPE_CONTROL_SET_SECURITY_PIN ``` Set security pin. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event.| | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3-7 | Security pin. This pin can be 1-5 bytes and length of event is set accordingly. It should be interpreted as an unsigned integer in the range 0-1099511627775. MSB byte is stored in first byte. | ---- ## Type=49 (0x31) - Set security password :id=type49 ``` VSCP_TYPE_CONTROL_SET_SECURITY_PASSWORD ``` Set security password. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event.| | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3-7 | Security password. This password can be 1-5 bytes and length of event is set accordingly. It should be interpreted as an UTF-8 string with a length set bt event data length - 3 | ---- ## Type=50 (0x32) - Set security token :id=type50 ``` VSCP_TYPE_CONTROL_SET_SECURITY_TOKEN ``` Set security token. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event.| | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3-7 | Token. This token can be 1-5 bytes and length of event is set accordingly. It should be interpreted as an unsigned integer in the range 0-1099511627775. MSB byte is stored in first byte. | ---- ## Type=51 (0x33) - Request new security token :id=type51 ``` VSCP_TYPE_CONTROL_REQUEST_SECURITY_TOKEN ``` Request new security token. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event.| | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | ---- ## Type=52 (0x34) - Increment :id=type52 ``` VSCP_TYPE_CONTROL_INCREMENT ``` Increment value. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3-7 | Increment as unsigned integer. The range can be adjusted by the user by sending just the needed number of bytes (1-5) which form the unsigned integer (MSB first). If omitted (or 0) 1 is assumed as default increment value. | ---- ## Type=53 (0x35) - Decrement :id=type53 ``` VSCP_TYPE_CONTROL_DECREMENT ``` Decrement value. | Data byte | Description | | :---------: | ----------- | | 0 | Optional byte that have a meaning given by the issuer of the event. | | 1 | Zone for which event applies to (0-255). 255 is all zones. | | 2 | Sub-zone for which event applies to (0-255). 255 is all sub-zones. | | 3-7 | Decrement as unsigned integer. The range can be adjusted by the user by sending just the needed number of bytes (1-5) which form the unsigned integer (MSB first). If omitted (or 0) 1 is assumed as default decrement value. | ---- [filename](./bottom_copyright.md ':include')