Back to VSCP Modules RFID 125kHz CAN VSCP proximity reader module with internal antenna
Hardware version 2.0 Software version 0.0.1
Red - +8..15V DC Brown - Gnd White - Key Green - CAN L Orange - CAN H Blue - CAN Shield
Project firmware and source code can be downloaded at the SVN.
Register 0(0x00) - Device Zone. Read/Write Register 1(0x01) - Device Sub Zone. Read/Write Register 2(0x02) - Red Led Sub Zone. Read/Write Register 3(0x03) - Green Led Sub Zone. Read/Write Register 4(0x04) - Key Sub Zone. Read/Write
Register 5(0x05) - Green Led On Time. (Reg * 100mS) Read/Write Register 6(0x06) - Red Led On Time. (Reg * 100mS) Read/Write Register 7(0x07) - Key On Time. (Reg * 100mS) Read/Write
Register 8(0x08) - RFID configuration register. Read/Write
Register 9(0x09) - PWM frequency value after autocalibration. Read only Register 10(0x0A) - PWM amplitude value after autocalibration. Read only
Register 11(0x0B) - Card CODE0. Read only Register 12(0x0C) - Card CODE1. Read only Register 13(0x0D) - Card CODE2. Read only Register 14(0x0E) - Card CODE3. Read only Register 15(0x0F) - Card CODE4. Read only Register 16(0x10) - Card CODE5. Read only
Class 20 (0x14) Information Type = 37 (0x25) Token Activity
Byte0 = 0x54 (Touched and released & RFID Token. 40-bits) Byte1 = Zone Byte2 = Subzone byte 3-7 = Card ID
The module has a decision matrix with five entries.
0(0x00) - NOOP
1(0x01) - "Turn ON" Red Led,Green Led or Key depend from Sub Zone
Gediminas Simanskis
info@edevices.lt
Tel: +37069912663
Vilnius,Lithuania
http://www.edevices.lt
Discussion